Round table “The use of glass in construction. Industrial processing of sheet glass, technologies, equipment, components and materials

The Association StekloSouz of Russia within the framework of the Business program of the International Building and Interior Exhibition Batimat Russia 2019 at the Crocus Expo IEC on March 13 organized and held a round table “The use of glass in construction. Industrial processing of sheet glass, technologies, equipment, components and materials ”. The unique platform, which is the largest exhibition Batimat Russia, allowed to combine the joint interests of manufacturers of materials, products and structures based on glass and representatives of the main consumer of the industry's products - the Construction Complex.

This event becomes traditional, the Round Table on the use of glass in construction held in 2018 by the Glass Union also attracted a lot of attention from the participants. The event was traditionally attended by architects, designers, developers, builders, construction organizations, manufacturers of facade structures, manufacturers of sheet and architectural glass, industrial glass processing enterprises, leading scientific organizations, technical committees for standardization TC 41 "Glass", PC 24 "Windows, doors, gates and accessories for them" TC 465 "Construction", TC 144 "Building materials and products", manufacturers and suppliers of equipment, components and materials.

Opening the meeting, the President of the StekloSouz Viktor Ivanovich Osipov noted the importance of organizing systemic interaction between regulatory and supervisory authorities, manufacturers of glass and translucent structures and the Construction Complex. Joint discussion of problems and ways to solve them serves to expand the areas of glass application in construction and increase the volume of use of glass-based products and structures.

The range of glass products is constantly being updated, becoming more in demand, modern and high-tech. Technologies, equipment and components are being improved accordingly.

The purpose of the last event is, first of all, the organization of systemic interaction between manufacturers of glass products, glass-based structures and consumers. Joint discussion allows expanding the scope of glass products in construction, increasing the volume of industrial processing of glass and expanding the use of translucent glass-based structures.

Products from sheet glass, foam glass and other segments of the glass industry are a unique material, but architects, designers, builders and consumers do not always know about all the possibilities this material provides and how to use it correctly. In addition, the innovative development of the glass industry allows us to offer consumers new, more modern types of glass: tempered and curved glass of large formats, glass with new types of coatings, highly transparent and high-strength glass, glass with ceramic printing, safety and fireproof glass, electrochromic, electrically heated and many others. types of glass products. The use of glass in the interior space of buildings is actively developing, these are glass partitions, glass floors and ceilings, glass stairs, bathrooms and showers. Taking into account the tendency to use large-sized glass products and structures, technologies and equipment for safe glass assembly are becoming important. Modern glass products are structural materials, including load-bearing and interfloor structures.

All these directions and the most relevant information were presented by the "Research Institute of Building Physics of the Russian Academy of Architecture and Building Sciences" (NIISF RAASN); JSC "Institute of Glass" and the technical committee for standardization TK 41 "Glass", subcommittee PC 24 "Blocks for windows, doors and gates. Completing products and materials ”TC 465“ Construction ”, TC 144“ Building materials and products ”and leading enterprises of the glass industry.

Particular attention was drawn to the discussion of the topic on the introduction of Amendments No. 1 to SP50.13330.2012 "SNiP 23-02-2003 thermal protection of buildings" in terms of translucent structures ". This document significantly increases the required values of the thermal resistance of translucent structures. The concerns of the industry community were caused by the excessive increase in requirements and the tight deadlines for their introduction, which significantly changed the situation on the market for translucent structures. In addition, the previous regulations were binding.

However, you should pay attention to the peculiarities of the application of this document. StekloSoyuz Rossi, on behalf of the industry community, sent a request to the leadership of the Ministry of Construction of Russia on the procedure for the new regulations. The answer received (attached) signed by the leadership of the Department of Urban Planning and Architecture of the Ministry of Construction of Russia made it possible to understand the situation. Codes of rules and GOSTs are documents applied on a voluntary basis. Certain standards can be applied on a mandatory basis if they are included in the Government Decree of December 26, 2014 No. 1521 "On approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal the law "Technical regulations on the safety of buildings and structures." However, changes made to the requirements of regulatory documents (their parts) included in the List in the process of updating them, in accordance with the legislation of the Russian Federation on technical regulation, are applied on a voluntary basis.

These changes come into force as mandatory for application only from the moment of entry into force of the resolution of the Government of the Russian Federation on making these changes to the list.

In connection with the above, Amendments No. 1 to SP 50.13330.2012 "Thermal protection of buildings" after entry into force will be applied on a voluntary basis.

The round table was chaired by Andrey Evgenievich Gorin, Director of the Department of Flat Glass and Industrial Processing of the Russian Glass Union Association.

At the event, the following topical reports were heard and discussed:

V.G. Gagarin, Head of the Laboratory of the Research Institute of Physics of the RAASN

Topic of the report: "The results of the development of Changes No. 1 to the Code of Rules SP 50.13330.2012" Thermal protection of buildings "in terms of increasing energy efficiency requirements for enclosing structures, including translucent structures"

AG Chesnokov, head of the laboratory of JSC "Glass Institute", head of the technical committee for standardization T; 41 "Glass".

Topic of the report: "The use of glass in construction. Industrial processing of sheet glass, technologies, equipment, components and materials" .

Orlov A.D., Ph.D.

Topic of the report: "PRODUCTION AND APPLICATION OF MATERIALS BASED ON FOAM GLASS" .

Rusin S.L.

Topic of the report: "Market of PVC window profiles. Main directions of development of the window market in Russia" .

Ivanov G.M.

Topic of the report: "MODERN TECHNOLOGIES AND EQUIPMENT FOR INSTALLATION OF LIGHT-TRANSPARENT STRUCTURES. SAFETY AND EFFICIENCY" .

Appendix: Letter from the Ministry of Construction of Russia on the implementation of Amendments No. 1 SP 50.13330.2012 “Thermal protection of buildings” .